Tuesday, October 24, 2017

Aprs software setup part 2

Hello everyone and welcome to the Aprs software setup part 2 . In this report I'll show you the last steps you need to get your Aprs on the air.


1.Bring up you aprs software?










2.from this screen go to configure  and then port
3 Click on add new port
you should a picture like this
 from this you need to name the port  for. This demo Call mine sound modem

the click on ok



































when you do this an option come this says port type. as shown here










Select tc/ip from here
from which you'll this option come up
from here you'll enter the following ip address
ip/dns is 127.0.0.1
port is 8100



When you are done click  

4. click on enable And select sound modem

after you set all this up go to configure
you should see a screen like this 
Enter your callsign and passcode then your all set . If you have any questions please feel free to Email me


Monday, October 23, 2017

Aprs setup guide part 1

Aprs setup guide 


For many ham radio operator finding the right digital mode isn't easy let alone the setup process.
so today I'm going to show you how to setup a APRS station easy and free. 
the first you'll need is aprs software . For this report will be using aprsis32 . After you download that program save to a folder. The next thing you need is a program that your aprs packet can seen while running the aprs Clint. For this post we'll you a program called soundmodem  
download the hs_soundmodem19.zip file and save it also . Oh before a forget you'll TNC to use this software or you can buy a signalink usb   .Now you've got the signalink and you downloaded the both programs so it's time got on the air.

1. Make sure your on National APRS channel 144.390 
2. go to your speaker option on the computer as shown here










After you speaker options on the computer select the signalink usb audio codec as your playback device . note make sure to disable your mine Pc speakers while you use the signlink .set the playback level to 100% The set the recording level to 75% Note make sure window sounds are set to No sound as we.

Note: you can always turn your windows sounds and speaker after you have run the program

OK now that you get the signalink all  set up time to get the Programs going. Will start with the soundmodem .

1 . unzip the hs_soundmodem19 file
2 Open the Program







3.from the setting menu to go devices










Make sure see the following setting in this area
1. Make sure both your output is set for the signalink usb audio codec . The input should me set to microphone. you'll need to check the following box here

Tx rotation
single channel output
color waterfall
Stop waterfall when minimize

4 go to Modem settings



 
in this area make sure the following  are checked as shown in the photo . keep it here for part two of this report. I'll go over the aprs software program setup with you.